RDIoT Demo

SMD5730 E27 24LED 30W Warm White (SMD5730) [D052]

https://www.youtube.com/watch?v=_5dkGiKGiN4

* Specs

Item Type:LED Bulbs

Beam Angle(°):360°

Average Life (hrs):50000

Base Type:E27

Shape:Bar

Voltage:220V

LED Chip Model:5730

Certification:CCC,CE,CQC,EMC,FCC,GS,LVD,PSE,RoHS

Power Tolerance:5%

Number of LED Chip:other

Color Temperature:Nature White(3500-5500K)

Occasion:living room

Led Bulb Type:Corn Bulb

Length:Other

LED Chip Brand:Other

FTDI Basic Breakout USB-TTL 6 PIN 5V Module (FT232RL) [B091]

https://www.youtube.com/watch?v=4DAoEV6L5EE

* GitHub : https://github.com/rdiot/rdiot-b091.git

* Specs

This is the newest revision of our FTDI BASIC. It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official  cloned 5V  boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows a target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your  target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of  for Arduino development and increase ease of use (the auto-reset feature rocks!). Our for Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. 

Smart Watch DZ09 (DZ09) [B007]

https://www.youtube.com/watch?v=lPOHlZIN-dw

* Specs

Supports single SIM (GSM)

It can call/answer the phone call ( using Bluetooth connectivity)

Easy sync between the connected smartphone and DZ09 smartwatch

Control the music player from your watch.

Take pictures from the watch itself, remote control your smartphone.

Sleep Monitoring– monitor your sleep quality

Pedometer– Record the steps and achieve your targets.

Sedentary reminder

Anti-lost/phone finder

A 1.56 inch TFT LCD display supporting handwriting recognition.

0.3 MP camera/remote control of smartphone’s camera is possible

TF card support (upto 32GB)

Powered by MTK6260A, 533 MHz processor

It has 128MB of RAM and 64 MB of ROM

Supports Single SIM ( GSM, micro SIM )

Bluetooth v3.0 connectivity

A 380mAh Li-on battery with a standby time of 180 hours and 5 hours of talk time