Bluetooth Anti Lost Smart Tracker iTag [S213]

* Specs

Free app to pair smart phone to iTag

Alerts when iTag and iPhone are ut of range

Self-portrait. Works as remote shutter, with burst shot

Bluetooth 4.0/Bluetooth Smart

Replaceable battery : Model CR2032 Lithum Coin Battery

Last Seen provides you within pin-drop on map to help you recover your item

Trigger on/off the voice recording on mobile phone

Posted by RDIoT

댓글을 달아 주세요

iBeacon Bluetooth 4.0 BLE Module [S227]

* Specs

iBeacon  Module Bluetooth 4.0 BLE Support Near-field Positioning Sensor Wireless Acquisition


Tested with iOS 7.0

Based on TI's CC2541. Range is 30M

Size: 24.8mm x 24.8mm,  thickness 7.5mm


You can customize your own iBeacon configuration including UUID etc

Support firmware upgrade 

Support payment interface 

Support broadcast read the battery level, temperature, humidity acquisition, without connecting module


BT Version: Bluetooth Specification V4.0 BLE

Send and receive no bytes limit.

Working frequency: 2.4GHz ISM band

Modulation method: GFSK(Gaussian Frequency Shift Keying)

RF Power: -23dbm, -6dbm, 0dbm, 6dbm, can modify through AT

Command AT+POWE.

Speed: Asynchronous: 6K Bytes

Synchronous: 6K Bytes

Security: Authentication and encryption

Service: Central & Peripheral UUID FFE0,FFE1

Power: +3.3VDC 50mA

Long range: Open space have 100 Meters with iphone4s

Power: In sleep mode 400uA~1.5mA, Active mode 8.5mA.

Working temperature:–5 ~ +65 Centigrade

Size: HM- 10 26.9mm x 13mm x 2.2 mm; HM-11 18*13.5*2.2mm

Posted by RDIoT

댓글을 달아 주세요

CC2540 BLE Protocol Analyzer (CC2540) [S173]

* Specs

Function characteristics:

Size: 4.5 * 1.7 cm

Small volume, light weight, leads to download port and common IO port, standard 1.27mm pin interface

Frequency band, the working frequency is 2.4GHz

Wireless transmission rate up to 1Mbps

Power: receiving the current <20mA, the emission current <25mA

The use of PCB antenna, extended the receiving distance.

With the SmartRF Packet Sniffer can achieve Bluetooth low energy BLE protocol analyzer function, with the CC2540_USBdongle_HostTestRelease_All.hex firmware can use BTool as a PC host computer

The official design, compatible with all the official application. The whole network only ultra narrow frame design.

Posted by RDIoT

댓글을 달아 주세요