Solar Charger shield Lipo Rider [B040]

* Specs

Solar adaptor connects to solar charge sheet. The output voltage of solar power plate is 4.8~6.5V. 

Interface BAT connects to rechargeable battery. If under charging, the CHARGE light is on. The light turns on when charging is finished. Charge power is 4.2V, and the current is 200 mA.

Open toggle switch, the flat USB can provide voltage 5V and current 100 mA.

It can achieve the port MINI_USB into flat USB port.

Posted by RDIoT

댓글을 달아 주세요

TP4056 1A Lipo Battery Charging Board (TP4056) [B036]

* Specs

Charge module- Linear charging.

Current- 1A adjustable.

Charge precision- 1.5%.

Input voltage- 4.5V-5.5V.

Full charge voltage- 4.2V.

Led indicator- red is charging blue is full charged.

Input interface- MICRO.

Work temperature- -10 to +85.

Inversed polarity- NO. MICRO

Posted by RDIoT

댓글을 달아 주세요

18650 3.7V Rechargeable Li-Ion Battery Dual Charger [B084]

* Specs

100% brand new and high quality.

Quantity: 1pcs.

Color: black.

Material: metal and plastic.


Input Voltage: AC 100-240V 50/60Hz

Compatible with: 18650  Li-ion Battery

When you plug the 18650 battery into the charger, it will show Red LED Light, and Green means in full charging condition

Output: DC4.2V,1A

Plug: EU plug

Battery are not included

Cable length: 38cm.

This product is very convenient and easy to use.

Posted by RDIoT

댓글을 달아 주세요

5V Micro USB 1A 18650 Lithium Battery Charging Board [B076]

* Specs

Inputs with MICRO USB female, can be directly input to do with the phone charger rechargeable lithium battery,

And still retains the input voltage wiring pads, can be very convenient DIY

Input voltage: 5V

Charging cut-off voltage: 4.2V ± 1%

Maximum charge current: 1000mA

Battery over-discharge protection voltage: 2.5V

Battery overcurrent protection current: 3A

Board size: 2.6 * 1.7CM

The first time you access the battery, it may no voltage between the output OUT + and OUT-, then access 5V voltage charge your energy can activate the protection circuit, and the battery from the B + B-, then draw a line on the short open also need recharged to activate the protection circuit. Note that the charger must be able to output 1A or more to do when using a mobile phone charger input, or may not charge

+ MICRO USB female and next - pads for the power input, access 5V. B + positive then the lithium battery, B- then negative lithium batteries. OUT + and OUT- connected to the load, such as positive and negative electrodes connected mobile booster plate or other load.

Connect the battery to the B + B-, inserted into the USB female mobile phone charger, the red light is being charged, the green light to full.

Posted by RDIoT

댓글을 달아 주세요

Mobile Universal Battery Charger LCD [B070]

* Specs



100% Brand New and High Quality Universal Battery Charger with USB Output Intelligent dedicated battery charger with USB output.

When the battery is fully charged,automatically stop charging.

Safety cut out circuit,Built-in protection circuit prevents overcharging.

Constant current,constant voltage charging,automatic identification.

The high-quality LCD screen indicates connection and full charge.

Also convenient to interchange your spare batteries Use the data line which corresponds to mobile phone can be charged directly to the phone.

Intelligent Chip: The smart chip protects from short circuit and overload by regulating voltage an ensuring a high effeciency charge. 

Technical Specifications:

Input: AC 100-240V 50/60Hz 150mA

Output: DC 4.2V 400mA +/-50mA,USB Port Output: DC5.2V, 1250mA(USB)

Connecter: US Plug

Short circuit and overload protection

Note: This Charger Just Fit For The Battery (32mm<=width<=55mm)

Compatible for:

For Acer, for Asus, for BlackBerry, for Casio, for HTC, for LG, for Motorola, for Nokia, for Samsung, for Sony Ericsson, for Toshiba, and so on.

Mp3 Mp4 players

Digital cameras

Mobile phones

...and many more rechargeable lithium-ion batteries under 4.7 volts

Posted by RDIoT

댓글을 달아 주세요