6bits Multicolor Rapid Prototyping LED [D050]



https://www.youtube.com/watch?v=CSUq8nZIrKM


*GitHubhttps://github.com/rdiot/rdiot-d050.git


* Specs

2.54MM PIN 6 Digitals LED Board ,Can be inserted directly into Arduiuo UNO MEGA2560 DUE  Board ,Ideal for linking up to your Arduiuo UNO Pro Mini Nano Mega2560 DUE  Development  Board  etc,or others MCU  Embedded development board  (AVR STM32 STM8 STM0 ARM7 ARM9 ARM11 PIC C8051 C51 STC MSP430 FPGA/CPLD etc.) 


6 bit    6 colors   Common Cathode LEDs.

Multicolor are White Blue Chartreuse Yellow Pink Red.

7 PIN OUT  2.54mm

1K ohm   Limiting resistor

Power Supply Voltage: 3.3-12V

LED &  Resistor Package : 0603

Size: 17.78MM x 11.43MM


* Contents

- Key Code

int D1 = 13;//White

int D2 = 12;//Blue

int D3 = 11;//Chartreuse

int D4 = 10;//Yellow

int D5 = 9;//Pink

int D6 = 8;//Red

 

int GND = 7;//GND

int D11 = 6;//White

int D12 = 5;//Blue

int D13 = 4;//Chartreuse

int D14 = 3;//Yellow

int D15 = 2;//Pink

int D16 = 1;//Red

 

int i;


void setup() {                

pinMode(D1, OUTPUT);   

pinMode(D2, OUTPUT); 

pinMode(D3, OUTPUT);  

pinMode(D4, OUTPUT);  

pinMode(D5, OUTPUT);  

pinMode(D6, OUTPUT); 

 

pinMode(D11, OUTPUT);   

pinMode(D12, OUTPUT); 

pinMode(D13, OUTPUT);  

pinMode(D14, OUTPUT);  

pinMode(D15, OUTPUT);  

pinMode(D16, OUTPUT);  

pinMode(GND, OUTPUT);  

digitalWrite(GND, LOW); 

}

 

 

// the loop routine runs over and over again forever:

void loop() {

  

  //White LED light than any other color lights, so reducing the brightness

  for(i=0;i< ms_cnt/6;i++)

  {

  digitalWrite(D1, HIGH);   

  delay(1);              

  digitalWrite(D1, LOW);    

  delay(5);               

  }

  

  digitalWrite(D2, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D2, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D3, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D3, LOW);    // turn the LED off by making the voltage LOW

 

  digitalWrite(D4, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D4, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D5, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D5, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D6, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D6, LOW);    // turn the LED off by making the voltage LOW

  

  //White LED light than any other color lights, so reducing the brightness

  for(i=0;i< ms_cnt/6;i++)

  {

    digitalWrite(D11, HIGH);   

    delay(1);              

    digitalWrite(D11, LOW);    

    delay(5);               

  } 


  digitalWrite(D12, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D12, LOW); 

  

  digitalWrite(D13, HIGH); 

  delay(ms_cnt);

  digitalWrite(D13, LOW); 

 

  digitalWrite(D14, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D14, LOW); 

  

  digitalWrite(D15, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D15, LOW); 

  

  digitalWrite(D16, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D16, LOW); 

}

Posted by RD IoT RDIoT

댓글을 달아 주세요

12V 360 Degree 5050 SMD Red (SMD5050) [D045]




https://www.youtube.com/watch?v=gw9pWSLNhes


* Specs

Brand new and high quality

Super Bright 5 SMD 5050 LED Chip

Low power consumption and ultra long life

Easy to install, simply to replace, convenient using

Can replacement of turn signal light, corner light, parking light, side marker light, tail light, and backup lights

Easy to replace Standard

194 168 501 W5W 147 152 158 159 161 184 192 193 259 280 285 447 464 555 558 585 655 656 657 1250 1251 1252 2450 2652 2921 2825

Wedge base Model which is a small bulb

Bulb Model: T10

Power Supply: DC 12V/1W

Dimensions: 1.1 in x 0.43 in x 0.43 in (28 mm x 11 mm x 11 mm)

Posted by RD IoT RDIoT

댓글을 달아 주세요

SMD5730 E27 24LED 30W Warm White (SMD5730) [D052]



https://www.youtube.com/watch?v=_5dkGiKGiN4


* Specs

Item Type:LED Bulbs

Beam Angle(°):360°

Average Life (hrs):50000

Base Type:E27

Shape:Bar

Voltage:220V

LED Chip Model:5730

Certification:CCC,CE,CQC,EMC,FCC,GS,LVD,PSE,RoHS

Power Tolerance:5%

Number of LED Chip:other

Color Temperature:Nature White(3500-5500K)

Occasion:living room

Led Bulb Type:Corn Bulb

Length:Other

LED Chip Brand:Other

Posted by RD IoT RDIoT

댓글을 달아 주세요

3LED 5050 SMD Module Pure Warm White (SMD5050) [D061]



https://www.youtube.com/watch?v=vvzeM5yt-oE


* Specs

Light Angle: 120 °

LED quantity: 3 PCS

Light life: 50000 hours

Working voltage: DC12V

Power: 0.25W (5050 smd) per module

Driving way: constant pressure drive

Waterproof: IP68 (could be used under water)

Shell material: anti-static, UV resistance, PVC plastic

With adhesive tape on the back

Shell size: 68*20mm

Item weight: About 10g one piece

Posted by RD IoT RDIoT

댓글을 달아 주세요

White LED Backlight Module [D068]



https://www.youtube.com/watch?v=7kpdhaMf6Es


* Specs

Mfg Part# KWB-R7323W/1W

Mfg Name: LUCKY LIGHT ELECTRONICS CO LTD

Operation Power : 3V 20mA

Weight : 5.6g

Size : 107.5 x 22.6 x 2.7mm


* Contents

- DataSheet : http://www.adafruit.com/datasheets/KWB-R7323W-1W.pdf


Posted by RD IoT RDIoT

댓글을 달아 주세요

LED G4 Lamp Bulb ACDC12V 2W AC220V Warm White [D060]



https://www.youtube.com/watch?v=hcDYaoXr6zg

* Specs

Item Type:LED Bulbs

Beam Angle(°):360°

LED Chip Brand:Cree

Average Life (hrs):30000

LED Chip Model:1W High Power

Certification:CCC,CE,CQC,RoHS

Color Temperature:Warm White (2700-3500K)

Occasion:Bedroom

Led Bulb Type:Corn Bulb

Length:Other

Shape:Other

Posted by RD IoT RDIoT
TAG LED

댓글을 달아 주세요

12V 4W 48 COB LED Lamp Light [D078]




https://www.youtube.com/watch?v=wPrqxzvDlA8



* Specs

Features:

100% Brand new and high quality!

Superior performance & reliable quality.

Long service life.

High power super bright LED light.

No dizzy, no uncomfortable glare, no zebra strips.

Great for making light sources for video camera, fish tank, decoration light.

What is COB?

COB (Chips on Board) is a new technology of LED packaging of LED light engine.

Multi LED chips are packaged together as one light module.

When it lights up, it looks like a lighting panel.

How COB LED light source works?

In COB lighting, single LED chips are placed directly on a circuit board (or substrate) which has thermal properties to disperse heat.

Heat dissipation is a very important aspect of LED lighting since it can have a major impact on the life expectancy of the luminary.

Therefore, COB lighting can have a higher LED chip density and achieve higher light level while maintaining or improving life expectancy.


Specifications:

Condition: brand new

Quantity: 1pc

Type: COB LED

Lighting angle: 180 degrees

Voltage: DC 12V

Current: 480mA

Power: 4W

Light Color: Warm White (3000-3500K)

Pure White (6000-6500K)

Size: 3.9*3.4cm

Posted by RD IoT RDIoT
TAG COB, LED

댓글을 달아 주세요

Arrow Indicator 14 SMD LED Blue [D077]




https://www.youtube.com/watch?v=TPuAOVKySIc


* Specs

This Product features one pair Brilliant Blue brand new 14-SMD-1210 LED arrow lights,can be hidden behind the side mirror for any cars, SUVs or trucks as turn signal lights.

We have redesigned this LED arrow with the LED lights embedded/hidden inside the circuit board so it is thinner than a Quarter. Thinner means less gap, so it will make the installation process easier for you.

Simply remove the side mirror, and place the LED arrows against the back of the mirror and tap the wires to the turn signal lights.

 

Features:

1 PC LED arrow

Color:Blue/Red/Green/White/Yellow

14 pieces 1210 type SMD LED lights

Ultra slim design, only 0.058" thin (about 1/3 the size vs other LED arrows on the market)

With the arrow pointing right ">" height: 2" width: 2"

Put LED lights behind the rear mirror, virtually invisible!

Highly recommend professional installation since it requires opening up the entire side mirror(not including installation instructions)


* Contents

- Connect

Red - 12V

Black - GND

Posted by RD IoT RDIoT
TAG LED

댓글을 달아 주세요

Bargraph Segment LED Module (SHB10R) [D024]



https://www.youtube.com/watch?v=-Qtzp6CA7Cc


*GitHubhttps://github.com/rdiot/rdiot-d024.git


* Specs

These 10 segment bar graph LEDs have many uses. With a compact footprint, and a simple hookup, they are easy for prototyping or finished products. Essentially, they are 10 individual red LEDs housed together.


Forward Current (Per Segment): 25mA

Max Reverse Voltage: 5v

10 segment bar

Color: Super Bright Red

Industrial standard size

Low power consumption

Categorized for luminous intensity 


* Contents

- Connect

1  ----- D2  - R220 - GND

2  ----- D3  - R220 - GND

3  ----- D4  - R220 - GND

4  ----- D5  - R220 - GND

5  ----- D6  - R220 - GND

6  ----- D7  - R220 - GND

7  ----- D8  - R220 - GND

8  ----- D9  - R220 - GND

9  ----- D10  - R220 - GND

10  ----- D11  - R220 - GND


- Key Code

#include <Wire.h> 

#include <LiquidCrystal_I2C.h>

 

LiquidCrystal_I2C lcd(0x27,20,4);  // LCD2004

 

int segPins[] = { 2,3,4,5,6,7,8,9,10,11 };

int idxBar = 0;

int minVal = 50;

int maxVal = 350;

int delayTime = 200;

 

byte digitsFill[10][10] = {

  {1,0,0,0,0,0,0,0,0,0},

  {1,1,0,0,0,0,0,0,0,0},

  {1,1,1,0,0,0,0,0,0,0},

  {1,1,1,1,0,0,0,0,0,0},

  {1,1,1,1,1,0,0,0,0,0},

  {1,1,1,1,1,1,0,0,0,0},

  {1,1,1,1,1,1,1,0,0,0},

  {1,1,1,1,1,1,1,1,0,0},

  {1,1,1,1,1,1,1,1,1,0},

  {1,1,1,1,1,1,1,1,1,1}

};

 

void setup()

{

  lcd.init();  // initialize the lcd 

  lcd.backlight();

  lcd.print("start LCD2004");

 

  for (int i=0; i<11; i++)

  {

    pinMode(segPins[i], OUTPUT);

  }

 

  delay(1000);

 

  lcd.clear();

}

 

void loop()

{

  lcd.setCursor(0,0);

  lcd.print("D024:Bargraph LED");

 

  idxBar = map(analogRead(A0), minVal, maxVal, 0, 9);

 

  lcd.setCursor(0,1);

  lcd.print("analog=" + (String)analogRead(A0) + "  ");

 

  for(int j=0; j<10; j++)

  {

    digitalWrite(segPins[j], digitsFill[idxBar][j]);

 

    lcd.setCursor(0,2);

    lcd.print("idxBar="+(String)idxBar+" "); 

  }

   delay(delayTime);

}

Posted by RD IoT RDIoT

댓글을 달아 주세요

Magic Cup Light Module (KY-027) [D020]



https://www.youtube.com/watch?v=yrBU-JRPk8M


*GitHub : https://github.com/rdiot/rdiot-d020.git


* Specs

Magic Light Cup modules are easy to Interactive Technology Division developed a can and ARDUINO interactive modules, PWM dimming principle is to use the principle of two modules brightness changes. Mercury switches provide a digital signal that triggers the PWM regulator, through the program design, We can see the light like two cups filled with the effect of shuffling back and forth.


* Contents

- Connect

G ----- GND

+ ----- X

S ----- D10

L ----- D11


- Key Code

#include <Wire.h> 

#include <LiquidCrystal_I2C.h>

 

LiquidCrystal_I2C lcd(0x27,20,4);  // LCD2004

 

int pinLed = 11;

int pinInput = 10;

 

int stateA = 0;

int brightness = 0;

int oldBrightness = 0;

 

void setup()

{

  lcd.init();  // initialize the lcd 

  lcd.backlight();

  lcd.print("start LCD2004");

 

  pinMode(pinLed, OUTPUT);

  pinMode(pinInput, INPUT);  delay(1000);

  digitalWrite(pinInput, HIGH);

 

  lcd.clear();

}

 

void loop()

  lcd.setCursor(0,0);

  lcd.print("D020:Magic Cup Light");

 

  stateA = digitalRead(pinInput);

 

  if (stateA == HIGH && brightness < 255)

    brightness++;

  if (stateA == LOW && brightness >0)

    brightness--;

  if (oldBrightness != brightness)

  {

    lcd.setCursor(0,1);

    lcd.print("brightness=" + (String)brightness + "  ");

  }

  oldBrightness = brightness;

  analogWrite(pinLed, brightness);

  delay(10); 

}

'3) Actuator > LED' 카테고리의 다른 글

Arrow Indicator 14 SMD LED Blue [D077]  (0) 2016.09.19
Bargraph Segment LED Module (SHB10R) [D024]  (0) 2016.09.19
Magic Cup Light Module (KY-027) [D020]  (0) 2016.09.18
RGB LED Module SMD (KY-009) [D008]  (0) 2016.09.18
RGB LED Module DIP (KY-016) [D007]  (0) 2016.09.18
RGB LED (BL-L515) [D006]  (0) 2016.09.18
Posted by RD IoT RDIoT

댓글을 달아 주세요

RGB LED Module SMD (KY-009) [D008]



https://www.youtube.com/watch?v=XQI3KhjrwfY


*GitHubhttps://github.com/rdiot/rdiot-d008.git


* Specs

Using 5050 full color LED with max current of 20mA

Forward Voltage : Red 1.80V (2.4 max), Green,Blue 2.8V (3.6V)

RGB trichromatic limiting resistor to prevent burnout

through the PWM adjusting three primary colors can be mixed to obtain different colors

with a variety of single-chip interface

Operating voltage: 5V

LED drive mode: common cathode driver


* Contents

- Connect

B ----- D9

R ----- D11

G ----- D10

- ----- 3.3V or 5V 


- Key Code

int B = 9; // OUTPUT PIN blue

int R = 11; // OUTPUT PIN red

int G = 10; // OUTPUT PIN green

 

void setup()

{

 Serial.begin(115200); 

 Serial.println("Arduino Examples - RGB LED");

 pinMode(R, OUTPUT);

 pinMode(G, OUTPUT);

 pinMode(B, OUTPUT);

}

 

void loop()

 // RED

 digitalWrite(R, LOW);

 digitalWrite(G, HIGH);

 digitalWrite(B, HIGH);

 delay(1000);

 

 // GREEN

 digitalWrite(R, HIGH);

 digitalWrite(G, LOW);

 delay(1000);

 

 // BLUE

 digitalWrite(G, HIGH);

 digitalWrite(B, LOW);

 delay(1000);

 

 // RED + GREEN = YELLOW

 digitalWrite(B, HIGH);

 digitalWrite(R, LOW);

 digitalWrite(G, LOW);

 delay(1000);

 

 // RED + BLUE = MAGENTA

 digitalWrite(B, LOW);

 digitalWrite(R, LOW);

 digitalWrite(G, HIGH);

 delay(1000);

 

 // GREEN + BLUE = CYON

 digitalWrite(B, LOW);

 digitalWrite(R, HIGH);

 digitalWrite(G, LOW);

 delay(1000);

 

 // RED + GREEN + BLUE = WHITE

 digitalWrite(B, LOW);

 digitalWrite(R, LOW);

 digitalWrite(G, LOW);

 delay(1000);

 

 // ALL OFF

 digitalWrite(B, HIGH);

 digitalWrite(R, HIGH);

 digitalWrite(G, HIGH);

 delay(1000);

}

Posted by RD IoT RDIoT

댓글을 달아 주세요

RGB LED Module DIP (KY-016) [D007]



https://www.youtube.com/watch?v=CBWuVl1_O38


*GitHubhttps://github.com/rdiot/rdiot-d007.git


* Specs

Use of full color LED

RGB tricolor current-limiting resistance to prevent burn out

Through the PWM regulating three primary colors mixed with different colors

With a variety of single chip microcomputer interface

Working voltage: 5V

LED drive mode: Yin drive


* Contents

- Connect

R ----- D11

G ----- D10

B ----- D9

- ----- GND


- Key Code

int redPin = 11;

int greenPin = 10;

int bluePin = 9;

 

void setup()

{

 pinMode(redPin, OUTPUT);

 pinMode(greenPin, OUTPUT);

 pinMode(bluePin, OUTPUT); 

}

 

void loop()

{

  setColor(255, 0, 0); // red

  delay(1000);

  setColor(0, 255, 0); // green

  delay(1000);

  setColor(0, 0, 255); // blue

  delay(1000);

  setColor(255, 255, 0); // yellow

  delay(1000); 

  setColor(80, 0, 80); // purple

  delay(1000);

  setColor(0, 255, 255); // aqua

  delay(1000);

}

 

void setColor(int red, int green, int blue)

{

  analogWrite(redPin, red);

  analogWrite(greenPin, green);

  analogWrite(bluePin, blue); 

}

'3) Actuator > LED' 카테고리의 다른 글

Magic Cup Light Module (KY-027) [D020]  (0) 2016.09.18
RGB LED Module SMD (KY-009) [D008]  (0) 2016.09.18
RGB LED Module DIP (KY-016) [D007]  (0) 2016.09.18
RGB LED (BL-L515) [D006]  (0) 2016.09.18
7 color flash LED Module (KY-034) [D010]  (0) 2016.09.18
2 Color(R,G) LED Module (KY-011) [D005]  (0) 2016.09.18
Posted by RD IoT RDIoT

댓글을 달아 주세요

RGB LED (BL-L515) [D006]



https://www.youtube.com/watch?v=A9x5JjcyAf4


*GitHubhttps://github.com/rdiot/rdiot-d006.git


* Specs

5.0mm Round Type, RGB Full Color LED Lamps

Diffused and Water clear lens are available.

Popular T-1 diameter package.

IC compatible /Low current capability.

RoHs Compliance


* Contents

- DataSheet : http://www.alldatasheet.com/datasheet-pdf/pdf/699972/BETLUX/BL-L515.html


- Connect

R ----- D11

GND ----- GND

G ----- D10

B ----- D9


- Key Code

int redPin = 11;

int greenPin = 10;

int bluePin = 9;

 

void setup()

{

 pinMode(redPin, OUTPUT);

 pinMode(greenPin, OUTPUT);

 pinMode(bluePin, OUTPUT); 

}

 

void loop()

{

  setColor(255, 0, 0); // red

  delay(1000);

  setColor(0, 255, 0); // green

  delay(1000);

  setColor(0, 0, 255); // blue

  delay(1000);

  setColor(255, 255, 0); // yellow

  delay(1000); 

  setColor(80, 0, 80); // purple

  delay(1000);

  setColor(0, 255, 255); // aqua

  delay(1000);

}

 

void setColor(int red, int green, int blue)

{

  analogWrite(redPin, red);

  analogWrite(greenPin, green);

  analogWrite(bluePin, blue); 

}

'3) Actuator > LED' 카테고리의 다른 글

Magic Cup Light Module (KY-027) [D020]  (0) 2016.09.18
RGB LED Module SMD (KY-009) [D008]  (0) 2016.09.18
RGB LED Module DIP (KY-016) [D007]  (0) 2016.09.18
RGB LED (BL-L515) [D006]  (0) 2016.09.18
7 color flash LED Module (KY-034) [D010]  (0) 2016.09.18
2 Color(R,G) LED Module (KY-011) [D005]  (0) 2016.09.18
Posted by RD IoT RDIoT

댓글을 달아 주세요

7 color flash LED Module (KY-034) [D010]



https://www.youtube.com/watch?v=TN4ByfN2Esk


*GitHubhttps://github.com/rdiot/rdiot-d010.git


* Specs

Product Type: LED

Product Model: YB-3120B4PnYG-PM

Shape: Round LED 5mm DIP type

Color: pink yellow green (high brightness)

Lens type: white mist

Standard Forward Voltage :3.0-4 .5 V


* Contents

- Connect

S ----- D2

Middle ----- X 

- ----- GND


- Key Code

int R = 2;

 

void setup()

{

 Serial.begin(115200);

 Serial.println("Arduino Examples - 7 Color Flash");

 pinMode(R, OUTPUT);

 digitalWrite(R, LOW);

}

 

void loop()

{

 digitalWrite(R, HIGH); // on (for 5 Second)

 delay(5000); 

}

'3) Actuator > LED' 카테고리의 다른 글

Magic Cup Light Module (KY-027) [D020]  (0) 2016.09.18
RGB LED Module SMD (KY-009) [D008]  (0) 2016.09.18
RGB LED Module DIP (KY-016) [D007]  (0) 2016.09.18
RGB LED (BL-L515) [D006]  (0) 2016.09.18
7 color flash LED Module (KY-034) [D010]  (0) 2016.09.18
2 Color(R,G) LED Module (KY-011) [D005]  (0) 2016.09.18
Posted by RD IoT RDIoT

댓글을 달아 주세요

2 Color(R,G) LED Module (KY-011) [D005]



https://www.youtube.com/watch?v=ab7KCHtr0VE


*GitHubhttps://github.com/rdiot/rdiot-d005.git


* Specs

The Keyes 2 Color LED Module is a simple yet effective LED that is compatible with Arduino systems.  


Specs:

Material: FR4

Length: 35mm

Width: 15mm

Height: 13mm

Weight: 1.35g

Operating Voltage: 5v DC



* Contents

- Connect

- ----- GND

R ----- D11 (red)

G ----- D10 (green)


- Key Code

int R = 11; // OUTPUT PIN red

int G = 10; // OUTPUT PIN green

 

void setup()

{

 Serial.begin(115200); 

 pinMode(R, OUTPUT);

 pinMode(G, OUTPUT);

}

 

void loop()

 analogWrite(R, 0);

 analogWrite(G, 0);

 

 // RED

 for (int i = 0; i < 256; i++)

 {

 analogWrite(R, i);

 delay(10); 

 }

 for (int i = 0; i < 256; i++)

 {

 analogWrite(R, 255-i);

 delay(10);

 }

 

 // YELLOW

 for (int i = 0; i < 256; i++)

 {

 analogWrite(G, i);

 delay(10);

 }

 for (int i = 0; i < 256; i++)

 {

 analogWrite(G, 255 - i);

 delay(10);

 }

 

 // RED + Green

 for (int i = 0; i < 256; i++)

 {

 analogWrite(R, i);

 analogWrite(G, i);

 delay(10);

 }

 

 for (int i = 0; i < 256; i++)

 {

 analogWrite(R, 255 - i);

 analogWrite(G, 255 - i);

 delay(10);

 } 

}

'3) Actuator > LED' 카테고리의 다른 글

Magic Cup Light Module (KY-027) [D020]  (0) 2016.09.18
RGB LED Module SMD (KY-009) [D008]  (0) 2016.09.18
RGB LED Module DIP (KY-016) [D007]  (0) 2016.09.18
RGB LED (BL-L515) [D006]  (0) 2016.09.18
7 color flash LED Module (KY-034) [D010]  (0) 2016.09.18
2 Color(R,G) LED Module (KY-011) [D005]  (0) 2016.09.18
Posted by RD IoT RDIoT

댓글을 달아 주세요