'2) Sensor/Wind'에 해당되는 글 1건

  1. 2016.09.07 Wind Speed Sensor 0~5V Voltage Type (JL-FSX2) [S163]

Wind Speed Sensor 0~5V Voltage Type (JL-FSX2) [S163]



https://www.youtube.com/watch?v=ZmksejqugVs


*GitHub : https://github.com/rdiot/rdiot-s163.git


* Specs

Signal output, Current signal, Pulse signal, Voltage signal, RS485/232 signal

Signal output way: 4 ~ 20 mA, 1.5 / M * S, 0 ~ 5 V, 1 ~ 5 V, RS485/232

Input voltage: DC24V/DC12V/DC5V

Response time: < 1 S

Transmission distance: > 1km

Measurement range: 0 ~ 5 M/S, 0 ~ 30 M/S, 0 ~ 50 M/S ( choose)

Measurement accuracy: Plus or minus 3%

Start wind speed: < 0.6 M/S

Environment temperature: E: -35 ~ 85 C (often-used) L: -55 to 150 C

Level position: + 80 Rotation, with a hammer, automatically adjust the horizontal position

Potential lead: Three wire or two wire

Material: Aluminum alloy, the surface waterproof, prevent corrosion treatment.

Other matters: Optional configuration RS485 communication output or RS232 output


* Content

- Connect

LH (GND), RH(VCC) <- External VCC 9V~

RB (Volate) -----> A0

LH GND -----> Arduino GND


- Key Code

int sensorValue = analogRead(A0);

float outvoltage = sensorValue * (5.0 / 1023.0);

int Level = 6*outvoltage;//The level of wind speed is proportional to the output voltage.

lcd.print("wind speed " + (String)Level + " Level");


'2) Sensor > Wind' 카테고리의 다른 글

Wind Speed Sensor 0~5V Voltage Type (JL-FSX2) [S163]  (0) 2016.09.07
Posted by RD IoT RDIoT

댓글을 달아 주세요