RDIoT Demo

100RPM Gear Motor [S141]

https://www.youtube.com/watch?v=YfyiXHbxo88

* GitHub : https://github.com/rdiot/rdiot-s141.git

* Specs

Description:  

This is a DC Mini Metal Gear Motor,ideal for making robots

Light weight, high torque and low RPM.

Fine craftsmanship,durable,not easy to wear.

With excellent stall characteristics,can climb hills easily.

You can also easily mount a wheel on the motor’s output shaft.

Specification:

We guarantee the high quality condition for you

Rated Voltage:DC 12V

Speed:100RPM

Shaft Diameter:3mm

Size:Diameter: 12 mm

fuselage without shaft length: 26 mm 

Output axial length: 10 MM to 4.4 MM

Name:DC Mini Metal Gear Motor.

Voltage range:6-12V

TT Motor Car Gear Motor [S142]

https://www.youtube.com/watch?v=Kw7BCf-NGGE

* GitHub : https://github.com/rdiot/rdiot-s142.git

* Specs

Operating voltage: 3V~12VDC (recommended operating voltage of about 6 to 8V)

Maximum torque: 800gf cm min (3V)

No-load speed: 1:48 (3V time)

The load current: 70mA (250mA MAX) (3V)

This motor with EMC, anti-interference ability. The microcontroller without interference.

Size: 7x2.2x1.8cm(approx)

Voltage load current No-load speed

 6V ≤200mA 200 ± 10% rpm

 3V ≤150mA 90 ± 10% rpm

* Contents

- Key Code

void setup() {

  pinMode(A0,OUTPUT);

  pinMode(A1,OUTPUT);

}

void loop() {

  // put your main code here, to run repeatedly:

  digitalWrite(A0,HIGH);

  digitalWrite(A1,LOW);

  delay(1000);

  digitalWrite(A0,LOW);

  digitalWrite(A1,HIGH);

  delay(1000);

  digitalWrite(A0,LOW);

  digitalWrite(A1,LOW);

  delay(2000);

}

Clamp Gripper Bracket Servo Mount [B045]

https://www.youtube.com/watch?v=j95yky2IYIc

* Specs

Use:Vehicles & Remote Control Toys

Technical parameters:Value 2

RC Parts & Accs:Servo Accessories

Model Number:gripper

Robot Clamp Gripper Bracket Servo Mount Plastic Claw Arm kit For MG995 MG996 SG5010 Servo use of the egineering Plastics material very light, solid and hardness