LCR-T4 Graphical Multi-function Tester (LCR-T4) [B060]

* Specs

Add boot voltage detection function 

Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components, 

Automatic test out the pin element and displayed on the LCD 

Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base 

Measure the gate threshold voltage and gate capacitance of the MOSFET 

LCD display uses LCD 1 2864 

High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal) 

Power consumption off mode: less than 20 nA 

Resistor: 0.1Ω-50MΩ

Capacitor: 25pF-100000uF

Inductance : 0.01mH - 20H

Working power:  DV-9V

Standby current:  0.02uA

Operating current:  25mA

* Contents

Potentiometer, PNP, NPN, Diode, MOSFET Test 

Posted by RDIoT

댓글을 달아 주세요