RDIoT Demo

USB Voltage Current Meter [B037]

https://www.youtube.com/watch?v=ZEU8NXHy-Sc

* Specs

eatures:

100% Brand New and High Quality

Display data: Voltage Current Capacity Time

Specification:

1.Input USB

2.RTZ, Reset button, press it three seconds will Reset

3.Out USB

4.Voltage: 3V-9V ( 1% accuracy )

5.Current: 0-3A ( accuracy of 0.4% )

6.Battery Capacity (0-99999mah)

7.Working time (0-99Hour)

8.The working time and Capacity have Memory function when power off

Color:As the picture show

Size: 7.3cm*2.3cm*1.35cm (LXWXH)

Quantity:1 Pcs

Net Weight: 25g 

FTDI Basic Breakout USB-TTL 6 PIN 5V Module (FT232RL) [B091]

https://www.youtube.com/watch?v=4DAoEV6L5EE

* GitHub : https://github.com/rdiot/rdiot-b091.git

* Specs

This is the newest revision of our FTDI BASIC. It now uses a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same.

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official  cloned 5V  boards. It can also be used for general serial applications. The major difference with this board is that it brings out the DTR pin as opposed to the RTS pin of the FTDI cable. The DTR pin allows a target to auto-reset when a new Sketch is downloaded. This is a really nice feature to have and allows a sketch to be downloaded without having to hit the reset button. This board will auto reset any board that has the reset pin brought out to a 6-pin connector.

The pins labeled BLK and GRN correspond to the colored wires on the FTDI cable. The black wire on the FTDI cable is GND, green is CTS. Use these BLK and GRN pins to align the FTDI basic board with your  target.

This board has TX and RX LEDs that make it a bit better to use over the FTDI cable. You can actually see serial traffic on the LEDs to verify if the board is working.

This board was designed to decrease the cost of  for Arduino development and increase ease of use (the auto-reset feature rocks!). Our for Arduino Pro boards and LilyPads use this type of connector.

One of the nice features of this board is a jumper on the back of the board that allows the board to be configured to either 3.3V or 5V (both power output and IO level). This board ship default to 5V, but you can cut the default trace and add a solder jumper if you need to switch to 3.3V. 

RD-400 USB Magnetic Stripe Card Reader (RD-400) [S171]

https://www.youtube.com/watch?v=ZYjTXQ7LQro

* Specs

Card standard: ISO7811-7815

Decoded mode: F2F(FM)

Swipe speed: 0-120cms

Head life: 600000times

Export export: Imitation XT, AT RS - 232 USB keyboard format

Identifiable decoding system: Code39 Code93 UPCEAN Codeabar Interleaved 2 of 5 Code128 Full ASCII Code39

Power: DC+5V 35mA

Use: Main supermarket.

Reading/writing magnetic stripe cards complies with ISO 7811 / 1~6 formats

Manual Swipe to read and/or write cards with PC standard RS-232 interface

Read/Write High and Low Coercive force of magnetic stripe (300~4000Oe)

5~35ips operational swipe speed of writing data

5~55ips operational swipe speed of reading data

+24VDC+/-10%, 2.0A Max., external power adapter attached

Writing and verifying data on single, dual, or triple track in one swipe

Programming software included for various read/write applications

Program software for DOS and Windows 98/Me

High/Low Coercivity encoding circuitry selectable on screen

Programmable leading bit, raw data, DMV/AAMVA, and user defined format

Compact size with dimensions of 90(L) x 26(W) x28(H) mm

USB Smart IC Card Reader [S204]

https://www.youtube.com/watch?v=RzknIMEdmhc

* Specs

This USB interface PC/SC Smart Card Reader reads both IC/ID card within a single device. With this integrated device, you can easily use your IC/ID card to pass the identification gate for e-commercial needs and maintain the mobile phone information of your SIM card

1) Support the Universal Serial Bus Specification

2) Compliance with Microsoft PC/SC specification and Plug-and-Play

3) Support Microsoft Smart Card for Windows

4) Windows 98SE/ME/2000/XP/VISTA, Windows 7, Windows 8; MAC 10.7 and above version, Linux

5) Power Supply: USB Powered

6) USB Type: USB 2.0 (1.1 Compatible)

7) IC Card (Smart Card): SLE4418/4428, SLE4432/4442, SLE4436/5536, 12C, Support 3V/5V IC Smart Card

OEM are Welcome! we can print customer's artwork and logo