100Khz-1.7GHz RTL SDR + Upconverter (2832U,R820T) [B079]

100Khz-1.7GHz RTL SDR + Upconverter (2832U,R820T) [B079]

https://www.youtube.com/watch?v=VuYwR3y14Ao

* Specs

1. Can be used to test signals receiving from VHF/UHF band

2. The receiving signal strength which received from VHF/UHF is not the best. It can be used to receive the nearby signals (eg. FM broadcasting radio or other Hand-held radios). To achieve the best effect, you need to connect associated antennas Cannot be used to receive HF signal band

3. To achieve the best effect, you need to connect associated HF antennas such as Long Wire , Random Wire, Dipole etc.

Functions:

Fully assembled and ready to use

Uses RTL2832U+R820T chip set

100KHz to 1766MHz, operating frequency

Covers all HF amateur bands

Covers VHF & UHF bands from 24-1766MHz

Up to 3.2 M Sample rate. (~2.8 MHz stable)

Receiver modes AM, NFM, FM, DSB, USB, LSB and CW

Note: depends upon the SDR software used with the receiver

8-bit ADC giving ~50 dB dynamic range

50 Ohm input impedance

Double SMA golden antenna connectors

Diode protection on RF input

Aluminum panels

LED power and band indication

40MHz local oscillator for HF conversion

DBM balance ring mixer

Small size board

Free software

Independent antenna inputs for Shortwave and VHF

USB computer connection ( mini usb) Powered by common USB

Very High dynamic range receiver

SPDT High Power UltraCMOS RF Switch

Accurate and efficient band filters

Very clean audio reception

All specifications subject to change without notice

* Contents

RTL SDR + Upconverter Basic Test FM Radio