3D Printed ikea skadis pegboard accessories
* Reference Source
- https://www.thingiverse.com/thing:2849398
IKEA SKADIS Towelholder by CSD_Salzburg
IKEA SKADIS_Towelholder -> you will need a 275mm long pvc-pipe od=16mm / id=14mm. easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thi
www.thingiverse.com
- https://www.thingiverse.com/thing:2849369
IKEA SKADIS Hookset (tight fit -> without wobbling) by CSD_Salzburg
IKEA SKADIS Hookset (tight fit -> without wobbling) easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thing:2851040 IKEA SKADIS Univers
www.thingiverse.com
- https://www.thingiverse.com/thing:2853257
IKEA SKADIS Universal Hook Set by CSD_Salzburg
IKEA SKADIS Universal Hook Set easy to print tight fit no wobbling no glueing One Hook -> many Options! IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thing:2851040 IKEA SKADIS Ho
www.thingiverse.com
- https://www.thingiverse.com/thing:2851040
IKEA SKADIS Container-/ Shelfset by CSD_Salzburg
IKEA SKADIS Container-/ Shelfset easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Hooksethttps://www.thingiverse.com/thing:2849369 IKEA SKADIS Universal Hook Sethttps://www.thingiver
www.thingiverse.com
- https://www.thingiverse.com/thing:2933140
Caco's ultimate IKEA SKÅDIS (Skadis) Peg Board Collection by Cacodaemon
After mounting my IKEA Skadis peg board, I was a little bit disappointed with the files on thingiverse I found for this type of peg board. So, I started designing my own collection of peg board parts. My design goals where that all files can be printed wit
www.thingiverse.com
- https://www.thingiverse.com/thing:4042873
Parametric Ikea Skadis Drill Bit Carousel by madc
Parametric Ikea Skadis Drill Bit Carousel This is a parametric Ikea Skadis Drill Bit Carousel designed in OpenSCAD, offering some parameters for customization. It is a remix of Ikea Skadis Dril Bit Carousel by 3Deddy. The carousel is designed to be fully c
www.thingiverse.com
- https://www.thingiverse.com/thing:4196820
IKEA_SKADIS_Pegboard_Caliper_Holder by SebDominguez
I just made a Caliper holder to fit my SKADIS IKEA pegboard. I wasn't really happy with the ones I've found on Thingivers, then I came across this really great collection of SKADIS accessories but unfortunately it didn't include a good caliper holder. So I
www.thingiverse.com
- https://www.thingiverse.com/thing:4115425
IKEA Skadis Peg board snap fit connector by ivanmailru
Hi, I needed to hang one IKEA Skadis under another and decided to design this snap-fit connector. Print without any support. In order to install it put two IKEA Scadis pegboards on the floor, take the longer connector part and put it underneath peg-boards.
www.thingiverse.com
- https://www.thingiverse.com/thing:2791919
SN-48B Crimping Plier holder for IKEA SKADIS pegboard by weidmane
SN-48B CRIMPING PLIER HOLDER FOR IKEA SKADIS PEGBOARD a simple design that works
www.thingiverse.com
- https://www.thingiverse.com/thing:2749146
Scissors holder for IKEA Skadis by 3dball
Holder for scissors or any other things which fit like pliers etc. Fits in IKEA Skadis.
www.thingiverse.com
- https://www.thingiverse.com/thing:2773037
Fluke Voltage Detector holder for IKEA Skadis by 3dball
Holder for Fluke Voltage Detector "VoltAlert", fits IKEA Skadis pegboard.
www.thingiverse.com
- https://www.thingiverse.com/thing:2347090
3D Printed Drill Bit Holder by MBcreates
https://www.youtube.com/watch?v=iirsGTFnTxM
www.thingiverse.com
- https://www.thingiverse.com/thing:2648038
Ikea Skadis (Pegboard) Box by marcluer
My first 3D design and my first Thingiverse upload. So be gentle ;) Inside dimensions: 124mm x 21mm Height: 30mm
www.thingiverse.com
- https://www.thingiverse.com/thing:3392612
Ikea Skadis Brymen multimeter container by egeltje
This is a container for the Ikea Skadis pegboard to hold the Brymen BM235 multimeter. Dave Jones from EEVblog sells a branded version to support his Youtube channel. I originally designed it so you could leave your leads connected, but that became a) unsta
www.thingiverse.com
- https://www.thingiverse.com/thing:3181792
SKADIS_10_Diamond-File_Holder by mar4711
This Holder is for 10 Diamond-File on a Ikea-Skadis-Pegboard. Diamond Filehttps://www.amazon.de/Silverline-633509-Diamant-Nadelfeilen-10-tlg/dp/B000LFTT1K/ref=sr_1_3?ie=UTF8&qid=1540739378&sr=8-3&keywords=diamond+file
www.thingiverse.com
- https://www.thingiverse.com/thing:4247453
IKEA Skadis Scraper Holder by Not_A_Penguin
Ikea Skadis Holder for scraper. Slightly loose fit.
www.thingiverse.com
- https://www.thingiverse.com/thing:2665067
IKEA Skadis - SD and microSD Card Holder by JayFi
--Update 12/09/2017-- Updated both models for wider tolerances. Cards should fit better now for everyone. Had them really tight just for my printer settings. --Update-- Updated with model including microSD slots. SD card holder for the IKEA Skadis. Have yo
www.thingiverse.com