QRD1114 Reflective Object Sensor (QRD1114) [S210]

* Specs

Derate power dissipation linearly 1.33 mW/°C above 25°C.

RMA flux is recommended.

Methanol or isopropyl alcohols are recommended as cleaning agents.

Soldering iron 1/16” (1.6mm) from housing.

As long as leads are not under any spring tension.

D is the distance from the sensor face to the reflective surface.

Cross talk (ICX) is the collector current measured with the

indicator current on the input diode and with no reflective surface.

Measured using an Eastman Kodak neutral white test card with 90% diffused reflecting as a reflective surface.

* Content

- Connect

- : L GND, R P220 - 5V

- : L P10K - 5V

--- Signal ---> D2

Speker : Ged -----> D3

: Black -----> GND

- DataSheet : https://www.sparkfun.com/datasheets/BOT/QRD1114.pdf

RDIoT Demo