6bits Multicolor Rapid Prototyping LED [D050]

6bits Multicolor Rapid Prototyping LED [D050]

https://www.youtube.com/watch?v=CSUq8nZIrKM

*GitHub : https://github.com/rdiot/rdiot-d050.git

* Specs

2.54MM PIN 6 Digitals LED Board ,Can be inserted directly into Arduiuo UNO MEGA2560 DUE  Board ,Ideal for linking up to your Arduiuo UNO Pro Mini Nano Mega2560 DUE  Development  Board  etc,or others MCU  Embedded development board  (AVR STM32 STM8 STM0 ARM7 ARM9 ARM11 PIC C8051 C51 STC MSP430 FPGA/CPLD etc.) 

6 bit    6 colors   Common Cathode LEDs.

Multicolor are White Blue Chartreuse Yellow Pink Red.

7 PIN OUT  2.54mm

1K ohm   Limiting resistor

Power Supply Voltage: 3.3-12V

LED &  Resistor Package : 0603

Size: 17.78MM x 11.43MM

* Contents

- Key Code

int D1 = 13;//White

int D2 = 12;//Blue

int D3 = 11;//Chartreuse

int D4 = 10;//Yellow

int D5 = 9;//Pink

int D6 = 8;//Red

 

int GND = 7;//GND

int D11 = 6;//White

int D12 = 5;//Blue

int D13 = 4;//Chartreuse

int D14 = 3;//Yellow

int D15 = 2;//Pink

int D16 = 1;//Red

 

int i;

void setup() {                

pinMode(D1, OUTPUT);   

pinMode(D2, OUTPUT); 

pinMode(D3, OUTPUT);  

pinMode(D4, OUTPUT);  

pinMode(D5, OUTPUT);  

pinMode(D6, OUTPUT); 

 

pinMode(D11, OUTPUT);   

pinMode(D12, OUTPUT); 

pinMode(D13, OUTPUT);  

pinMode(D14, OUTPUT);  

pinMode(D15, OUTPUT);  

pinMode(D16, OUTPUT);  

pinMode(GND, OUTPUT);  

digitalWrite(GND, LOW); 

}

 

 

// the loop routine runs over and over again forever:

void loop() {

  

  //White LED light than any other color lights, so reducing the brightness

  for(i=0;i< ms_cnt/6;i++)

  {

  digitalWrite(D1, HIGH);   

  delay(1);              

  digitalWrite(D1, LOW);    

  delay(5);               

  }

  

  digitalWrite(D2, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D2, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D3, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D3, LOW);    // turn the LED off by making the voltage LOW

 

  digitalWrite(D4, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D4, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D5, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D5, LOW);    // turn the LED off by making the voltage LOW

  

  digitalWrite(D6, HIGH);   // turn the LED on (HIGH is the voltage level)

  delay(ms_cnt);               // wait for a Millisecond

  digitalWrite(D6, LOW);    // turn the LED off by making the voltage LOW

  

  //White LED light than any other color lights, so reducing the brightness

  for(i=0;i< ms_cnt/6;i++)

  {

    digitalWrite(D11, HIGH);   

    delay(1);              

    digitalWrite(D11, LOW);    

    delay(5);               

  } 

  digitalWrite(D12, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D12, LOW); 

  

  digitalWrite(D13, HIGH); 

  delay(ms_cnt);

  digitalWrite(D13, LOW); 

 

  digitalWrite(D14, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D14, LOW); 

  

  digitalWrite(D15, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D15, LOW); 

  

  digitalWrite(D16, HIGH); 

  delay(ms_cnt); 

  digitalWrite(D16, LOW); 

}