IR Transmitter Module [S066]

IR Transmitter Module [S066]

https://www.youtube.com/watch?v=dSP6zp6fjdE

*GitHub : https://github.com/rdiot/rdiot-s066.git

* Specs

Product Name IR Transmitter Module

Working Voltage DC 5V

Pin Quantity 3

Body Size 21 x 22 x 5mm/0.83" x 0.87" x 0.2"(L*W*T)

Material Plastic, Electronic Part

Main Color As Picture Show

Net Weight 5g

Package Content 1 x IR Transmitter Module

* Contents

- Connect

Transmitter

GND - GND

VCC - 5V

DAT - D3 (When RAW)

Receiver

pin- - GND

middle pin - 5V

S - D11

- Key Code

Transmitter

#include <IRremote.h>

//* An IR LED must be connected to Arduino PWM pin 3.

IRsend irsend;

void loop() {

 

  int khz = 38; // 38kHz carrier frequency for the NEC protocol

 

  unsigned int  rawData[67] = {4500,4400, 600,1650, 550,1650, 650,1600, 600,550, 550,550, 550,550, 550,550, 550,550, 550,1650, 600,1650, 550,1650, 600,550, 550,550, 550,550, 550,550, 550,550, 600,500, 600,1600, 600,550, 550,550, 550,550, 550,550, 550,550, 550,550, 600,1600, 600,550, 550,1650, 600,1650, 550,1650, 600,1650, 600,1650, 550,1650, 600};  // SAMSUNG E0E040BF

  unsigned int  data = 0xE0E040BF;

 

  irsend.sendRaw(rawData, sizeof(rawData) / sizeof(rawData[0]), khz); //Note the approach used to automatically calculate the size of the array.

 

  delay(5000); //In this example, the signal will be repeated every 5 seconds, approximately.

}

Receiver

#include <Wire.h> 

#include <LiquidCrystal_I2C.h>

#include "IRremote.h"

 

LiquidCrystal_I2C lcd(0x27,20,4);  // LCD2004

int receiver = 11; // pin 1 of IR receiver to Arduino digital pin 11

 

IRrecv irrecv(receiver);           // create instance of 'irrecv'

decode_results results;            // create instance of 'decode_results'

String str_hex = "";

String str_value = "";

 

void setup()

{

  lcd.init();  // initialize the lcd 

  lcd.backlight();

  lcd.print("start LCD2004");

 

  irrecv.enableIRIn(); // Start the receiver

 

  delay(1000);

 

  lcd.clear();

}

 

void loop()

{

 

  lcd.setCursor(0,0);

  lcd.print("S066:IR Transmitter");

  

  if (irrecv.decode(&results)) // have we received an IR signal?

  {

    //    Serial.println(results.value, HEX);  UN Comment to see raw values

    translateIR(); 

 

    lcd.setCursor(0,1);

    lcd.print("str_hex=" + (String)str_hex);

    lcd.setCursor(0,2);

    lcd.print("str_value=" + (String)str_value);

 

    irrecv.resume(); // receive the next value

  }   

}

 

void translateIR() // takes action based on IR code received

{

  switch(results.value)

  {

 

  case 0xE0E040BF:  

    str_hex = "0xE0E040BF";

    str_value = "power off ";

    break;

 

  default: 

    str_hex = (String)results.value;

    str_value = "NONE      ";

 

  } 

  delay(500);

 

} //END translateIR