'skadis'에 해당되는 글 1건

  1. 2020.04.16 3D Printed ikea skadis pegboard accessories

3D Printed ikea skadis pegboard accessories

 

 

* Reference Source

- https://www.thingiverse.com/thing:2849398

 

IKEA SKADIS Towelholder by CSD_Salzburg

IKEA SKADIS_Towelholder -> you will need a 275mm long pvc-pipe od=16mm / id=14mm. easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thi

www.thingiverse.com

- https://www.thingiverse.com/thing:2849369

 

IKEA SKADIS Hookset (tight fit -> without wobbling) by CSD_Salzburg

IKEA SKADIS Hookset (tight fit -> without wobbling) easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thing:2851040 IKEA SKADIS Univers

www.thingiverse.com

- https://www.thingiverse.com/thing:2853257

 

IKEA SKADIS Universal Hook Set by CSD_Salzburg

IKEA SKADIS Universal Hook Set easy to print tight fit no wobbling no glueing One Hook -> many Options! IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Container-/ Shelfsethttps://www.thingiverse.com/thing:2851040 IKEA SKADIS Ho

www.thingiverse.com

- https://www.thingiverse.com/thing:2851040

 

IKEA SKADIS Container-/ Shelfset by CSD_Salzburg

IKEA SKADIS Container-/ Shelfset easy to print tight fit no wobbling no glueing IKEA SKADIS Collectionhttps://www.thingiverse.com/thing:2853261 IKEA SKADIS Hooksethttps://www.thingiverse.com/thing:2849369 IKEA SKADIS Universal Hook Sethttps://www.thingiver

www.thingiverse.com

- https://www.thingiverse.com/thing:2933140

 

Caco's ultimate IKEA SKÅDIS (Skadis) Peg Board Collection by Cacodaemon

After mounting my IKEA Skadis peg board, I was a little bit disappointed with the files on thingiverse I found for this type of peg board. So, I started designing my own collection of peg board parts. My design goals where that all files can be printed wit

www.thingiverse.com

- https://www.thingiverse.com/thing:4042873

 

Parametric Ikea Skadis Drill Bit Carousel by madc

Parametric Ikea Skadis Drill Bit Carousel This is a parametric Ikea Skadis Drill Bit Carousel designed in OpenSCAD, offering some parameters for customization. It is a remix of Ikea Skadis Dril Bit Carousel by 3Deddy. The carousel is designed to be fully c

www.thingiverse.com

- https://www.thingiverse.com/thing:4196820

 

IKEA_SKADIS_Pegboard_Caliper_Holder by SebDominguez

I just made a Caliper holder to fit my SKADIS IKEA pegboard. I wasn't really happy with the ones I've found on Thingivers, then I came across this really great collection of SKADIS accessories but unfortunately it didn't include a good caliper holder. So I

www.thingiverse.com

- https://www.thingiverse.com/thing:4115425

 

IKEA Skadis Peg board snap fit connector by ivanmailru

Hi, I needed to hang one IKEA Skadis under another and decided to design this snap-fit connector. Print without any support. In order to install it put two IKEA Scadis pegboards on the floor, take the longer connector part and put it underneath peg-boards.

www.thingiverse.com

- https://www.thingiverse.com/thing:2791919

 

SN-48B Crimping Plier holder for IKEA SKADIS pegboard by weidmane

SN-48B CRIMPING PLIER HOLDER FOR IKEA SKADIS PEGBOARD a simple design that works

www.thingiverse.com

- https://www.thingiverse.com/thing:2749146

 

Scissors holder for IKEA Skadis by 3dball

Holder for scissors or any other things which fit like pliers etc. Fits in IKEA Skadis.

www.thingiverse.com

- https://www.thingiverse.com/thing:2773037

 

Fluke Voltage Detector holder for IKEA Skadis by 3dball

Holder for Fluke Voltage Detector "VoltAlert", fits IKEA Skadis pegboard.

www.thingiverse.com

- https://www.thingiverse.com/thing:2347090

 

3D Printed Drill Bit Holder by MBcreates

https://www.youtube.com/watch?v=iirsGTFnTxM

www.thingiverse.com

- https://www.thingiverse.com/thing:2648038

 

Ikea Skadis (Pegboard) Box by marcluer

My first 3D design and my first Thingiverse upload. So be gentle ;) Inside dimensions: 124mm x 21mm Height: 30mm

www.thingiverse.com

- https://www.thingiverse.com/thing:3392612

 

Ikea Skadis Brymen multimeter container by egeltje

This is a container for the Ikea Skadis pegboard to hold the Brymen BM235 multimeter. Dave Jones from EEVblog sells a branded version to support his Youtube channel. I originally designed it so you could leave your leads connected, but that became a) unsta

www.thingiverse.com

- https://www.thingiverse.com/thing:3181792

 

SKADIS_10_Diamond-File_Holder by mar4711

This Holder is for 10 Diamond-File on a Ikea-Skadis-Pegboard. Diamond Filehttps://www.amazon.de/Silverline-633509-Diamant-Nadelfeilen-10-tlg/dp/B000LFTT1K/ref=sr_1_3?ie=UTF8&qid=1540739378&sr=8-3&keywords=diamond+file

www.thingiverse.com

- https://www.thingiverse.com/thing:4247453

 

IKEA Skadis Scraper Holder by Not_A_Penguin

Ikea Skadis Holder for scraper. Slightly loose fit.

www.thingiverse.com

- https://www.thingiverse.com/thing:2665067

 

IKEA Skadis - SD and microSD Card Holder by JayFi

--Update 12/09/2017-- Updated both models for wider tolerances. Cards should fit better now for everyone. Had them really tight just for my printer settings. --Update-- Updated with model including microSD slots. SD card holder for the IKEA Skadis. Have yo

www.thingiverse.com

- https://www.thingiverse.com/thing:3772318

Posted by RDIoT
|