Digital Multi Servo Tester ECS [B176]



https://www.youtube.com/watch?v=pz_NQSSGqaw


* Specs

Features:

CCPM Servo Consistency Master / Servo tester

The device also can be used as a signal generator for electric speed controller (ESC), then you can test your motor system without using a transmitter and receiver.

There are 3 modes to check servos or ESC:

Manual mode: turn the knob with different speed, check the reaction time.

Neutral mode: make the servo go back to the neutral point.

Automatic \"window wiper\" mode: make the servo swing like a window wipers in the biggest angle.

It can connect 1-3 servos simultaneously and test such as 1-3 servos consistency and so on.

You can also connect 1-3 ESC to test and compare their reaction time respectively.

It can connect 3 servos of the CCPM helicopters and select servos.

It can also connect the servo of airplanes install the steering-box and adjust planes by using such as the neutral mode and so on.


Specification:

Voltage consumption: DC4.8-6V 

Size: 48 x 42 x 17mm 

Original box: NO

Color: Blue

Item size: 48*42*17 mm

Net weight: 7g

Package weight: 13g


Packet content:

1 x multi Servo tester

Posted by RDIoT
|

LED Light Voltage Alert Pen AC90-1000V [B132]



https://www.youtube.com/watch?v=xBxRg90FA2o


* Specs

Electric Socket Wall AC Power Outlet Voltage Detector Sensor Tester Pen 90-1000V

The next generation  AC non-contact voltage testers are easy to use ? just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there is voltage present. Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home.

Frequency Range: 50 to 500 Hz

Test Voltage Range: 90-1000V AC

Safety Rating :  CAT II 1000v 

Powered By: 2 x AAA Batteries (Not included)

A perfect tool kit for home and electric industry uses

Ideal design for testing power cables, circuit breakers, wall sockets, junction boxes, fuses, etc

Just press the button, white LED light can be always on when there is absence of voltage

"Beep" sound and red flashing LED would indicate the presence of voltage

Totally insulated, no exposed metal or conductive parts

Long life and low power consumption

Compact, safety, & easy to carry

Specifications:

Material: ABS Plastic

Color: Yellow & Grey

Item size: 152*23*15mm

Package size: 204*91*19mm

Net weight: 45g

Packing content:

10 x LED Light Voltage Alert Pen


* Contents

AC Test

Posted by RDIoT
|

LCR-T4 Graphical Multi-function Tester (LCR-T4) [B060]





https://www.youtube.com/watch?v=DozjfVv5Ysg



* Specs

Add boot voltage detection function 

Automatic detection of NPN and PNP transistors, N-channel and P-channel MOSFET, diodes (including dual diode), thyristors, transistors, resistors and capacitors and other components, 

Automatic test out the pin element and displayed on the LCD 

Can be detected to determine the transistor emitter forward bias voltage of the transistor, MOSFET protection diode and the amplification factor of the base 

Measure the gate threshold voltage and gate capacitance of the MOSFET 

LCD display uses LCD 1 2864 

High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal) 

Power consumption off mode: less than 20 nA 


Resistor: 0.1Ω-50MΩ

Capacitor: 25pF-100000uF

Inductance : 0.01mH - 20H

Working power:  DV-9V

Standby current:  0.02uA

Operating current:  25mA


* Contents

Potentiometer, PNP, NPN, Diode, MOSFET Test 

Posted by RDIoT
|

1-8S Lipo Li-ion Battery Voltage Tester [B058]




https://www.youtube.com/watch?v=MDVC3DGXnAE


* Specs

Features:

Use for 1-8S Lipo/Li-ion/LiMn/Li-Fe

Specification:

Voltage detection precision: +_0.01V.

Unit voltage display range: 0.5~4.5V

Total voltage display range: 0.5~36V

1S test mode voltage range: 4-15V

Low voltage alarm mode for 2-8S

Alarm set value range:OFF~2.7~3.8V

Size: 40mm x 25mm x 11mm

Original box: NO

Net weight: 9g

Package weight: 15g

Color: Red


* Contents

Lipo Li-ion Battery Voltage Test

Posted by RDIoT
|

Diode LED Tester 9V 2~150mA [B157]






https://www.youtube.com/watch?v=n8qo-_L4AIA



* Specs

Item Condition: Brand New.

Color: White. 

Power Supply: 9V Battery.

Dimension: 8.0(L) x 5.5(W) x 2.2(H)cm

Material: High quality hard plastic.

Weight: 36g.

Wonderful Tool for testing LED (2-150mA), can test Lots of  LED at the same time.


* Contents

LED Diode Test 

Posted by RDIoT
|