Ceramic Piezo Vibration Sensor [S133]



https://www.youtube.com/watch?v=YRrDOdgsokU


*GitHubhttps://github.com/rdiot/rdiot-s133.git



* Specs

his ALSRobotBase Ceramic Piezo Vibration Piece Sensor buffers a piezoelectric transducer that responds to strain changes by generating a measurable output voltage change which is propotional with the strength of vibration.So you can know the extent of vibration. Different from digital vibration sensor that only accounts times, this analog one can tell extent of vibration.

When the piezoelectric ceramic shocking will generate an electrical signal, Arduino Controller analog port can be perceived slight vibration signals, Also can be realized with vibration interactions related works, such as electronic drums.


Working Voltage: 3.3V or 5V

Working Current: <1mA

Operating Temperature Range: -10 ~ + 70

Interface Type: Analog Output

Item Size: 30mm x 23mm

Item Weight: 5g

GPIO: S; signal output, +; power supply (VCC), -; ground (GND)

Input: Positive electrode of the piezoelectric ceramic

Gnd: Negative electrode of the piezoelectric ceramic

S-port is connected with the controller\'s analog input pin

5V and GND are respectively connected the power supply of + 5V and GND

Input and Gnd are already connected with the piezoelectric ceramics\' positive and negative


* Contents

- Connect

S ----- D2

+ ----- 5V

- ----- GND


- Key Code

lcd.print("Value=" + (String)digitalRead(2) + " ");

Posted by RD IoT RDIoT

댓글을 달아 주세요